Explore 338 preserved service records across our communities.
Preserved service history
Maytag Washer
replaced drain hose on washer and fixed suspension rods. Job complete
Samsung Microwave
adjusted latch assembly and test unit and everything tested out okay. job complete
GE,Whirlpool Wall Oven,Washer
replaced. bake element on customers range and reset the washer control board on the washer and tested both units and both units tested out okay. job complete
Whirlpool WASHER
customers complaint is that the washer would not start. fixed burned up wiring to washer and testing unit and everything tested out okay. Job complete
Lg Dryer
Found breaker was tripped. reset breaker and everything tested out okay. Job complete
Whirlpool Washer
Customers complaint is that the washer would not stop draining. Replaced main PCB and tested unit and everything tested out okay. Job complete
Samsung Wall Oven
adjusted igniter and cleaned out gas tubing and tested the unit five times and everything ignited properly just fine. Job complete
Samsung Dryer
Replaced defective thermistor and tested dryer and everything tested out okay. Job Complete
GE,Samsung Washer,Refrigerator
installed new board and tested unit and everything tested out okay.Job complete ,customers complaint is that the washer would not start or operate and throwing an error code for the door being left open.
during my diagnosis I found the customer striker broken as well as a piece stuck in the door lock mechanism itself. ordering a new striker and door lock for the customer.,after replacing lock assembly, the door opens and shuts as normal. however, the customer's motherboard is not sending power to operate the door lock. We will need to order a new motherboard to resolve issues.
Whirlpool DISHWASHER
fixed drainage issue with dishwasher. tested unit and everything tested out okay. job complete
Maytag WASHER
Cleared error code and ran a test cycle and everything tested out okay. Job complete
Frigidaire Microwave
door assembly is broken. recommended replacement.