Family-owned. Faith-driven. Here to help.Serving Mebane & the North Carolina Piedmont
Called to Repair · North Carolina

Whirlpool Front-Load Washer

We serviced a

Whirlpool Front-Load Washer

Durham, NC 27704

Whirlpool Front-Load Washer · Model WFW5620HW0

Customer complaint: keeps spinning and wont turn off on its own and they have to turn it off. Initial visit (Nov 20) — Mike S: Reported concern The unit was evaluated for operating faults. While in service mode, two separate error codes were found: one indicating a long drain condition and one indicating a communication error with the main control board (PCB). Assessment A long drain code means the unit is not sensing that the water has drained within the expected time. This can stop or delay a cycle. The drain pump tested fine. When the pressure hose was disconnected from the pressure sensor, a slight clog was found at the bottom of the hose. A blocked pressure line can keep the sensor from reading water level correctly, which may contribute to drain-related faults. Work performed The pressure line was cleaned out and reattached. Two quick cycles were then run, and the unit completed both cycles with no issues. Next steps If the issue returns, the planned repair is to replace the main control board (PCB) and the pressure sensor.

Completed

Mike S · 2026-11-20 · Job completed