Whirlpool Dishwasher
Whirlpool Dishwasher
Customer complaint: When they hit the start button, it seems to start, but stops and remains lit up. This happens immediately 5934. Initial visit (Nov 19) — Mike S: Reported concern The unit was not circulating water during operation. Assessment During diagnostics, the unit filled with water normally, and it drained when the cycle was canceled. However, it did not circulate water. Without circulation, water is not sprayed through the wash system, so dishes do not get cleaned even though the fill and drain functions work. The technician tested the circulation pump and found that power was reaching it. The pump was found to be inoperative. Because the pump is receiving power but not running, the pump itself is identified as the cause of the circulation failure. Next steps The planned repair is to replace the circulation pump. We recommend confirming the compatible circulation pump part number for this model before ordering. After installation, a test cycle is recommended to verify that water circulates correctly and that fill and drain continue to work normally. Due to the cost of repair, the customers decided to purchase another unit.
