Samsung Dryer
Samsung Dryer
Customer complaint: Filter indicator keeps flashing and wont run. already tried unplugging it and plugging it back in. still flashes the indicator and wont run. Initial visit (Nov 16) — Mike S: Reported concern The dryer was inspected during a diagnostic service visit. The drum could be turned by hand very easily, with no resistance. Normally the belt holds the drum under tension, so free rotation indicates the motor can no longer drive the drum and the dryer cannot tumble clothes. Assessment The unit was disassembled for inspection. The drive belt was broken. The belt tensioner had seized and could no longer maintain proper belt tension or move freely, and this was identified as the reason the belt broke. Work performed The seized tensioner was replaced, and a new drive belt was installed. Because the old tensioner caused the belt failure, replacing both parts addresses the immediate failure and helps protect the new belt. The dryer was then tested, and no further issues were found. The unit is operating normally, and the job is complete. Parts installed: BELT-TIMING GEAR;RUBBER RED/YEL T2.4 W8, PULLEY ASSEMBLY MOTOR. Outcome: Repaired.
- BELT-TIMING GEAR;RUBBER RED/YEL T2.4 W8 (6602-001655) — Installed
- PULLEY ASSEMBLY MOTOR (4561EL3002A) — Installed
